Hiboy DK1 Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Fahrrad Hiboy DK1 herunter. Hiboy DK1 9 Seiten. Electric scooter
Auch für Hiboy DK1: Benutzerhandbuch (8 seiten)

Seite drucken

Handlebar assembly

M8*L20mm screws with

hexagon socket head cap

Up aluminum assembly

Down aluminum assembly

Put the handlebar assembly on the up

aluminum

assembly, move it symmetrically

and adjust it to the right angle for your

riding.

Put on the up

aluminum

assembly, then put

on 4pcs M8*20mm cylindrical head socket

head cap screws.

Tighten the screws with a 6mm socket

head wrench.

4. Charging

Open the rubber plug

Note:

• Hiboy electric dirt bike will be fully charged when the LED light on the charger changes from red （charging） to green.

When the battery is fully charged, please STOP CHARGING and unplug the unit.

• Do not charge when there is excessive odour/ heat, leakage or physical damage.

• Do not connect the charger if the charging port is wet. Keep your charging environment clean and dry at all times.

• If the charging port is damp or has any liquid on it, do not charge your E-Bike.

• In order for the battery to operate at maximum efficiency, avoid charging your E-Bike in extremely hot or extremely cold

environments.

• Use only the battery and charging cable provided to you by HIBOY. If a replacement is needed, please contact HIBOY directly.

• Use caution when charging. Charger should be operated by an adult.

• Always disconnect from the charger prior.

Insert the charging plug in

Fill and fix the rubber plug

after the charging