GAI-Tronics Clean Phone 295W Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Handbuch für Telefon GAI-Tronics Clean Phone 295W herunter. GAI-Tronics Clean Phone 295W 19 Seiten.

Pub. 42004-146H

8 of 17

Model 295F and 295W Clean Phone™ Telephone

Page:

Programming Information

The GAI-Tronics Model 295 Clean Phone is programmable. There are a number of features that can be

customized, or you may use the factory settings (defaults).

The programmable features include setting the auto-dial numbers, setting the auto-dial time delay, setting

the number of rings before Model 295 automatically answers, selecting DTMF or pulse dialing, and

selecting the remote programming password.

Model 295 Clean Phone can be programmed in two ways—local and remote. The front panel of the

Model 295 Clean Phone is used for local programming with the local password. To program the unit

remotely, you must call the Model 295 Clean Phone, and enter the password (from a DTMF phone).

Programming the unit is the same whether the programming mode is entered locally or remotely except

that each mode has its own unique password. The unit must be in the programming mode before

attempting to program any functions. After each programming key sequence, either a confirmation tone

(a single beep) or an error tone (a high-low tone) will sound. A confirmation tone indicates the command

was accepted, and that the new input has been saved. Any fully completed programming sequence is

saved in the permanent memory. If, however, you begin programming a function, and do not complete all

the steps, it will not be saved, and all the information for that function must be re-entered.

The Programming Table lists the programmable functions on the Model 295 Clean Phone and the input

codes for each of these functions. The table also lists the defaults (factory settings).

d:\standard ioms - current release\42004 instr. manuals\42004-146h.doc

11/05