GAI-Tronics PHP400 Installations- und Benutzerhandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Installations- und Benutzerhandbuch für Telefon GAI-Tronics PHP400 herunter. GAI-Tronics PHP400 20 Seiten. Analogue version (1090/1099 series) with ampetronic hls-dm2 induction loop amplifier 230v ac power supply
Auch für GAI-Tronics PHP400: Design, Installation und Benutzerhandbuch (20 seiten), Installations- und Benutzerhandbuch (20 seiten)
Seite drucken
9. Before refitting the front case section, set up the GSM terminal as follows. Remove
the 2 screws holding the GSM terminal retaining bracket to allow access to the cover
and SIM holder.
10. Remove the cover from the GSM terminal to reveal the SIM card holder, fir the SIM
as shown below
11. Apply power (or replace the fuse). The LED on the internal power supply unit and the
right-hand green LED on the GSM terminal will illuminate.
The centre green indicator will show a rapid on/off flash while the GSM terminal
initialises itself (approx 15 secs).
12. Following initialization, the centre green indicator should be lit steadily – indicating
that the terminal is ready. The 3 LEDs on the GSM terminal can indicate various
different operating states and faults as shown below:
NOTE if the unit indicates that the SIM is locked (or blocked) this must be rectified
before the Help Point will operate. There is no way to unblock or unlock a SIM from
the Help Point.
PHP400 GSM Help Point.
8