DayTronic 3000PLUS Gebrauchsanweisung - Seite 17

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Messgeräte DayTronic 3000PLUS herunter. DayTronic 3000PLUS 20 Seiten. Panel meter, frequency conditioner module
Auch für DayTronic 3000PLUS: Gebrauchsanweisung (20 seiten)

Seite drucken

A SAMPLE CONFIGURATION is installed with the

software, to let you see typical 3000PLUS setup

entries. Select Open... from the Configurator File

menu and double-click on "SAMPLE."

14. To UNINSTALL the 3KP Configurator Software,

Go to the Windows popup Start menu, select

Settings, and then select Control Panel. Then

double-click on the button called Add/

Remove... (or Add or Remove Programs).

Select "3000PLUS Configurator" from the list of

programs, and click the appropriate button to

remove it.

When asked whether you're sure you want to

completely remove the 3KP Configurator and

all its components, answer Yes to uninstall (or

No to abort). You may be asked whether

you're sure you want to remove

3000PLUS

5D40 I

WITH

1. I

NTRODUCTION

MSCOMM32.OCX and COMDLG32.OCX

(which are shared components). If in doubt,

answer No.

NOTE: This procedure will NOT delete any

"*.mdb" 3KP CONFIGURATION FILES currently

in your Configurator installation directory which

were created through the Configurator soft-

ware. In fact, if you have created any such files,

you will be told that the directory itself cannot

be removed (click Ok to exit this message). A

hidden file named "TOC.GID" may remain in the

installation directory after removal of the Con-

figurator software. This file is harmless, and will

not affect any later reinstallation of the Configu-

rator.

NSTRUCTION

ANUAL V

3KP40 - 1.13

. SB.3