Automatic Technology Megacode Tricode 128 Handbuch - Seite 19
Blättern Sie online oder laden Sie pdf Handbuch für Empfänger Automatic Technology Megacode Tricode 128 herunter. Automatic Technology Megacode Tricode 128 20 Seiten. Multi-frequency four channel receiver
Seite drucken
Appendix
F - Transmitter Managment
Transmitter Listing Facility
The MegaCode
the User to find a transmitter location within memory. Once located
a stored transmitter can be replaced, deleted, edited, copied or, if
the location is empty, a new transmitter can be coded.
Method 1 - Go To The Start Of The List
n
Accessing The List Menu
t
a. Press NEXT to navigate to Menu 1
e
b. Press SET to enter the transmitter edit procedure.
0
c. Press NEXT to enter the transmitter list and edit mode.
Method 2 - Use The Transmitter To Go Direct To The List
Accessing The List Menu
a. Press NEXT to navigate to Menu 1
b. Press SET to enter the transmitter edit procedure.
c. Press the transmitter once
d. Press NEXT to view the transmitter parameters
This method is used for quick navigation if the transmitter is
available.
NOTE: "VIEW" will not be shown if the transmitter is not stored.
Once the list is displayed, it can be sorted by stored number, ID
Label or Serial Number. Use the NEXT or PREV buttons to select
the sorting method.
NOTE: When sorting by ID label or S/N, only stored transmitters
r.
locations are displayed.
Navigating The List
a. Press the UP or DOWN buttons to navigate through the list
(Fig.
F.4).
e
NOTE: Holding a button down will step through the list faster.
b. Press SET to display the menu of available functions.
Selecting An Operation
a. Press NEXT or PREV to cycle through the four menu options
(Fig F.5)
b. Press EXIT to return to the list. Press SET to execute the menu's
operation.
n.
Menu Option
Code Operation (location empty)
Code Operation (location used)
e
Delete Operation
Edit Operation
Copy Operation
Exiting The List
®
provides a transmitter listing facility which enables
(Fig.
F.1).
(Fig.
F.1).
(Fig.
F.2).
Operation
If the code operation is selected on an empty transmitter location, the BASIC CODE
TRANSMITTER PROCEDURE will be initiated with the transmitter being saved in the
selected location. This is useful when managing transmitters using a scheme which ties
the store location to the transmitter's owner.
If the code operation is selected for a location that already contains a transmitter,
then the BASIC CODE TRANSMITTER PROCEDURE will be initiated and the new
transmitter will replace the existing one. Note that the button functions and name of
the existing transmitter will be transferred to the new transmitter. This procedure is of
great convenience when replacing a lost transmitter.
The delete operation is used to remove a transmitter from memory along with the
name and button function settings.
The edit operation displays the transmitter record for editing purposes.
TRANSMITTER EDIT PROCEDURE (Appendix E) for details.
The copy operation is used to code multiple transmitters with the same button function as
that of the selected transmitter. Once selected an abbreviated code set routine is initiated for
each transmitter to be coded. Coding is terminated by pressing the EXIT button.
To exit the transmitter list, simply press EXIT to return to the Code menu.
Press Tx'er
Button! LIST—›
(Fig.
F.3).
Installation Instructions MegaCode
MENU 1
Code Transmitter
PRESS
PRESS
Press Tx'er
Again!
VIEW—»
PRESS
31∆ ID T SMITH
P_1 --- R_1 T_2
PRESS
PRESS
See
Receiver
®
Fig F.1
Fig F.2
Fig F.3
Fig F.4
Fig F.5
19