Dynalabs DYN-MS-250 Produkthandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Produkthandbuch für Farbspritzgerät Dynalabs DYN-MS-250 herunter. Dynalabs DYN-MS-250 14 Seiten. 250 n ms shaker

Seite drucken
All rights reserved. Reproduction or issue to third parties in any form whatsoever is not permitted without written authority from the proprietors.

3.2.2) Amplifier Internal Signal

The amplifier can generate sine signal from 1Hz to 15 kHz with 1 Hz
increments that the user can adjust with the Sine Frequency Generator
Switch. Connect DC power source and drive signal to shaker power input.
Pull the Gain Knob out. Raise or lower the Sine Frequency Generator Switch
to the desired Sine frequency. Adjust the Gain of the amplifier by turning the
Gain Knob clockwise. The frequency of the generated sine signal will be
visible on the LCD Screen.

3.2.3) Amplifier External Signal

Start the external signal source. Adjust the Gain of the amplifier by turning
the Gain Knob clockwise.

3.2.4) Amplifier Maintenance and Troubleshooting

The only user replaceable part is the fuse placed inside the shaker.
10