HID EdgeReader Handbuch zur Schnellinstallation - Seite 5

Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Kartenleser HID EdgeReader herunter. HID EdgeReader 14 Seiten.

EdgeReader and EdgePlus Installation

Step 1 Connect

1.1

Reference 82000-902 Reference Card for wiring instructions.

Contact the Edge device through two methods.

•

Discovery Client (DHCP or Static TCP/IP Configurations Only)

•

Virtual Port

2.1

The Discovery Client provides a technician with a method of locating all of the Edge devices that are

connected to a network. Edge device information is displayed providing the ability to 'blink' the Edge

device Comm LED and configure it by launching a browser pointed at the Configuration GUI of the

targeted Edge device. When the Discovery Client is launched, a discover command is issued and the

Configuration GUI screen is populated with the results. Also provided is the ability to refresh the

Configuration GUI screen on command.

Use this feature when the Edge device(s) and the network have been installed and are operational, but

before the Edge device(s) has been configured. At this point, all of the Edge devices on a network will

have the same host name and unknown IP addresses (assuming a DHCP environment). In this

scenario, the only mechanism available to configure a Edge device is by placing one device on the

network at a time. The Discovery Client provides an easy to use mechanism to configure Edge devices.

2.1.1

Installation

An operating system of Windows XP with .NET Framework v2.0 installed is a requirement for the

Discovery Client to function properly.

1. The Discovery Client can be downloaded by placing the following path in an Internet browser.

http://www.hidcorp.com/downloads/DiscoveryClient.zip

2. The File Download

3. When the contents of the zip file display, double-click

4. If a security warning is received, click

5. From the Discovery Client Welcome page, click

6. Select the Installation folder and who should have access to the Discovery Client, click

7. Confirm the installation location, click

8. Click Close

April 2007

dialog will display, click

Run

Open

setup.exe

Part No. 82000-901

Page 5 of 14