GReddy Multi D/A Gauge Gebrauchsanweisung - Seite 7
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Zubehör für Kraftfahrzeuge GReddy Multi D/A Gauge herunter. GReddy Multi D/A Gauge 8 Seiten.
Seite drucken
7.Troubleshooting
Please refer to the following troubleshooting advices.
Symptom
・ Indicating lower value.
・ With ignition on, the pointer
is not at zero.
・ "Warning action" outside
the preset value.
・ Pointing strange value.
・ With power on, the pointer
doesn't function.
・ With ignition off, the pointer
doesn't come back at zero.
・ No ending demo.
8. Service after the sales
Please don't hesitate to inform us if there is anything unclear.
If you find different manufacturing numbers between meter and power unit,
please bring it to the place you purchased or let us know directly.
Multi D/A Gauge is warranted for one year from the date of purchase against
manufacturer defects. Coverage is valid only with proof of purchase from an
Authorized Dealer. Alteration of this product will void warranty.
Additional services are available for a nominal charge.
Cause
・ Grounding wire is not on the minus terminal
on the battery.
・ Miswiring.
・ Picking up noise from ignition signal or other
signals.
・ Wiring is short circuit.
・ Wiring is disconnected or break.
・ Sensor harness's coupler is connected
mistakenly.
・ Power source and ignition power source
are not connected each other.
Solution
・ Extend the black line from the power source
and connect to the minus terminal.
・ Please refer to "4 Installation" and rewire
them.
・ Avoid noise occurring areas and reinstall
sensor harness.
・ Check if any damage on wire and if it is
touching car body or not.
・ Check if the coupler is disconnected or
the wire is damaged.
・ Check if the coupler is installed properly.
・ Wire power source and ignition power
separately.