Dynalink RTA1046VW Konfigurationshandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Konfigurationshandbuch für Netzwerk-Router Dynalink RTA1046VW herunter. Dynalink RTA1046VW 7 Seiten. Adsl2+ wireless voip router
Auch für Dynalink RTA1046VW: Spezifikationen (3 seiten)
Seite drucken
Modem Configuration Guide
L. Find the SSID (network name) of your router and
click on Connect. By default the SSID should start with
RTA1046VW
M. You will now be prompted to enter your WEP Key.
N. After click on Connect
O. You should now see your status as 'Connected'
6. IPTV
Your router is already IPTV ready, there is no need for further
configuration. To use IPTV you must first be registered.
Please refer to
www.tpg.com.au/iptv
7. CHANGE OF PASSWORD
For security purposes we highly recommend that you change
your password if you are using your default or if you believe your
password security has been compromised.
To change your password, first please visit
https://cyberstore.tpg.com.au/your_account/?function=changepassword.
Your new password will take approximately 10-15 minutes to take
effect, after which you must reconfigure your new password
in your router.
To change your password in your router, please follow the
following steps:
A. Open your browser and in the address bar type
http://192.168.1.1 and press enter
B. Enter admin for both the username and password and
click on OK. If you have changed the login credential,
please enter the current username and password for
your router interface
C. In the Password field, enter your new TPG password
D. Click on Connect
PLEASE NOTE:
ADSL routers will by default be capable of automatic authentication. This means your router will use your credentials you
have provided to make the Internet connection. Each time your router is powered on, it will initialize this automated
authentication process after which your router will receive a public IP address (fixed or dynamic depending on your plan) and
DNS settings from TPG
tpg.com.au/support
for further details
13 14 23
Dynalink RTA1046VW
7