HID EDGE EVO ESH400-K Installationshandbuch

Blättern Sie online oder laden Sie pdf Installationshandbuch für Controller HID EDGE EVO ESH400-K herunter. HID EDGE EVO ESH400-K 13 Seiten. Standard networked controller

Seite drucken

I N STAL L ATI ON G UI DE

EDGE EVO®

Standard Networked Controller

EH400-K/ESH400-K

EDGE EVO is the next evolution in access control hardware solutions. A true IP solution that meets the demands of

open architecture, IP-centric environments, EDGE EVO provides fully distributed intelligence and decision making right

to the door, leveraging the IT infrastructure to the maximum extent possible. Leveraging Power-over-Ethernet (PoE),

EDGE EVO reduces door installation costs by not requiring a separate local power supply under many circumstances.

The Standard Networked Controller is a fully integrated single-door controller offering discrete I/O and Wiegand/

Clock-and-Data interfaces to readers. Additionally, connect native Hi-O™ devices (readers, locks, pushbuttons) and

EDGE EVO Hi-O Modules to the Hi-O bus, providing secure communication around the door. Hi-O involves devices with

built-in intelligence and a CANbus that links all the devices together. Password protect or encrypt Hi-O CANbus data

traffic. Each Hi-O device (such as the push plate, electric strike, card reader and door operator) is connected to the

CANbus by a single, four-wire cable. Two wires supply power and the other two are used for data communication.

Specifications

CONDITIONS

DC Input (NSC)

DC Input (MAX)

Supervised inputs

(AC, Batt, REX, Door Mon) (MAX)

Data 1/CLK , Data 0 / Data (MAX)

GRN LED, RED LED, Beep, Hold (MAX)

External Tamper (MAX)

AUX 12/24 VDC Input

CAN DC

PWR Output

(MAX)

PoE Input

AUX 12 VDC

Reader DC

PWR Output

AUX 24 VDC

(MAX)

PoE Input

AUX 12 VDC

Input

AUX 24 VDC

Strike***/

Input

AUX Relays

NC or NO

DC Output

(MAX)

PoE Input

AUX/PoE

Input

Legend

AUX = Auxillary input or output

CAN = CANbus

NSC = Normal Standby Condition

This Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output

are fictitious. Specifications are subject to change without notice.

trademarks of HID Global, ASSA ABLOY AB, or its affiliate(s) in the US and other countries and may not be used without permission. All other trademarks, service marks, and product

or service names are trademarks or registered trademarks of their respective owners.

VOLTAGE DC

+12 VDC

+24 VDC

PoE (+48 VDC NOM) 0.085 Amp 4.08 W

+12 VDC

+24 VDC

PoE (+48 VDC NOM)

0-+5VDC Reference

+5VDC (NOM)

+10.8 to +24 VDC

+ 24 VDC (NOM)

+9.8 to +12.25 VDC

+10 to +12 VDC

Unregulated

(Wet) Jumpers

+23 to +24 VDC

Regulated (Wet)

Jumpers - 12 VDC +10 to +12 VDC

Unregulated

+16.5 to +24 VDC

(Wet) Jumpers

Regulated (Wet)

+10 to +12 VDC

Jumpers - 12 VDC

Jumpers Set to

+12 to +24 VDC

Dry

External

PoE = Power over Ethernet

NC = Normally Closed

NO = Normally Open

An ASSA ABLOY Group brand

OPERATING

CURRENT

POWER

TEMPERATURE

0.18 Amp

2.16 W

0.14 Amp

3.36 W

1 8.00 W

1 .50 Amp

36.00 W

0.30 Amp

14.40 W

0.005 Amp

0.025 W

(sink)

N/A

N/ A

0.005 Amp

0.025 W

(sink)

0.02 Amp

0. 1 00 W

1 .2 Amp*

28.80 W

0.4 Amp*

9.60 W

32° - 122°F

(0° - 50° C)

0.32 Amp*

3.92 W

0.60 Amp*

7.35 W

0.58 Amp*

7.11 W

8.40 W

0.70 Amp*

16.80 W

8.40 W

0.36 Amp* 8.64 W

0.58 Amp* 6.96 W

2 .00 Amp ** 48.00 W

* Combined output ratings not to exceed V*I = W:

• 1.2 Amp (+ 24 VDC Aux Input, 28.8 W)

• 1.2 Amp (+ 12 VDC Aux Input, 12.96 W)

** Each relay

*** S hared between each relay

82000-921, Rev. D.3

REGULATORY

CABLE LENGTH

REF NUMBER

Hi-O CANbus

Total Length:

100 ft (30 m)

22 AWG

0.65 mm

0.33 mm

Maximum between drops:

30 ft (10 m)

KE400CX

22 AWG

0.65 mm

0.33 mm

RJ-45

328 ft (100 m)

Category 5 K

Regulatory Reference

Number Deciphering

= K for Black

G for Gray

= N for non-Solo

S for Solo