Gree 13-04686 Betriebsanleitung - Seite 10

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Klimagerät Gree 13-04686 herunter. Gree 13-04686 20 Seiten.

5. Adjust the platform assembly so that the

rear of the air conditioner will be 3/16 inch

lower than the front. This ensures proper

water drainage from the air conditioner.

NOTE: A projection below the base of the

air conditioner will require the rear of the

platform to be 7/16-inch lower than the

front to create the 3/16-inch slant from front

to rear.

6. Securely attach a siding-protection board

to the side of the house where the platform

assembly hit the house. The siding-protec-

tion board should be long enough to span 2

wall studs.

7. Measure the height of the window open-

ing from the top of the platform assembly.

Subtract 20-5/8 inches. Mark this measure-

ment on the plastic window panel, along

the longer side.

8. Clamp the plastic window panel between

a board and a work table, and cut along the

cutting line with a fine tooth saw. Remove

any burrs with a file.

9. Fasten the side channels to the sides of

the unit using three screws (Item 17) per

channel. Make sure hook ends of channels

face toward the back of unit.

10. Slide the plastic window panel into the

panel frame with the smooth side to the out-

side. Slide the panel frame assembly into the

side channels of the air conditioner cabinet.

Make sure the plastic window panel is firm-

ly enclosed on all sides by the retainer

grooves.

(continued)

Rear is at least 7/16" lower than front

Fasten siding protection board to the

house siding.

Measure

distance and

subtract

20 5/8 inches.

Panel frame

Plastic window panel