Celestron ASTROMASTER 127 EQ Handbuch zur Schnelleinrichtung

Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Teleskop Celestron ASTROMASTER 127 EQ herunter. Celestron ASTROMASTER 127 EQ 20 Seiten.

Seite drucken
90 E Q
T E L E S C O P E
M A K S U T O V - C A S S E G R A I N
T E L E S C O P E
127 EQ
M A K S U T O V - C A S S E G R A I N
QUICK SET-UP GUIDE
1
Your AstroMaster 90/127EQ MAK includes: optical tube w/
StarPointer finderscope, tripod with center support bracket,
equatorial mount, two eyepieces, two counterweights,
counterweight bar, two slow motion cables, erect image
diagonal, accessory tray, and CR2032 battery.
4
All three legs should be the same length to provide a level
platform for the telescope.
7
Locate the equatorial mount and place the base of the mount
through the hole in the center of the tripod mounting platform.
#22058
#22059
ENGLISH
2
To set up the tripod, spread the legs outward until they are
fully extended. Extend the center portion of each of the
three tripod legs down 6-12".
5
To attach the accessory tray, line up notches and turn clockwise
until tray tabs lock into place with the tripod brackets.
8
From underneath the tripod mounting platform, thread the
mounting nut into the threaded hole on the bottom of the
equatorial mount.
3
Use the three tightening screws located at the bottom of
each leg to secure the extended legs in place.
6
Properly assembled, the accessory tray should appear as
pictured above.
9
Thread the latitude adjustment screw into the equatorial
mount until the screw is touching the inside of the mount.
ENGLISH | 1