DynaLock 2280-TJ80 Installationsanleitung Handbuch - Seite 4
Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Durch Schlösser DynaLock 2280-TJ80 herunter. DynaLock 2280-TJ80 8 Seiten. Single/inswing electromagnetic lock
Seite drucken705 Emmett Street Bristol, CT 06010
1-877-DynaLock www.dynalock.com
Locate the two 1/4-20x1/2" armature
mounting bracket assembly screws and lock
washers from the hardware kit and assemble
the bracket as shown.
Firmly tighten the mounting screws with a
5/32" hex wrench. They may be loosened
later for adjustment, as necessary.
ATTACH THE ARMATURE TO THE ARMATURE MOUNTING BRACKET
Attach the Armature Housing to the top Armature Mounting Bracket using
four (4) 8-32x3/8" Armature Housing Screws.
Attach the armature to the armature mounting bracket as shown.
Firmly tighten the Armature Mounting Screw using a 3/16" hex wrench.
Failure to properly secure the armature to the bracket could result in
serious injury or possible security breach.
ARMATURE
MOUNTING
SCREW
2280-TJ80 MANUAL - FORM 2280TJ-001
ASSEMBLE THE ARMATURE MOUNTING BRACKET
ARMATURE HOUSING
ARMATURE
SPACER
ARMATURE
MODEL 2280-TJ80 SINGLE/INSWING
ELECTROMAGNETIC LOCK
INSTALLATION INSTRUCTIONS
BRACKET ASSEMBLY SCREW
LOCK WASHER
LOWER ARMATURE BRACKET
FLAT
STEEL WASHER
ARMATURE HOUSING SCREW
ARMATURE MOUNTING BRACKET
Page 4
UPPER ARMATURE
BRACKET
4/07