Gree AEHAA-D3DNA1C/I Installations- und Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Installations- und Benutzerhandbuch für Klimagerät Gree AEHAA-D3DNA1C/I herunter. Gree AEHAA-D3DNA1C/I 15 Seiten.

Seite drucken

How to use the remote control to operate the unit

QUIET:

Press this button, the Quiet status is under the Auto Quiet mode (display

and Quiet mode (display "

after powered on, the Quiet OFF is defaulted. Note: the Quiet function cannot be set up in Fan

and Dry mode;Under the Quiet mode (Display "

CLOCK:

Press CLOCK button, blinking

present time.Holding down either button above 2 seconds increases or decreases the

time by 1 minute every 0.5 second and then by 10 minutes every 0.5 second. During

blinking after setting, press CLOCK button again to confirm the setting,and then

will be constantly displayed.

T-ON T-OFF:

Press T-ON button to initiate the auto-ON timer. To cancel the auto-timer program, simply

press this button again.

After press of this button,

setting. Within 5 seconds, press + or - button to adjust the time value. Every press of either

button changes the time setting by 1 minute. Holding down either button rapidly changes the

time setting by 1 minute and then 10 minutes. Within 5 Seconds after setting, press TIMER

ON button to confirm.

Press T-OFF button to initiate the auto-off timer. To cancel the auto-timer program, simply

press the button again.TIMER OFF setting is the same as TIMER ON.

TURBO:

Press this button to activate / deactivate the Turbo function which enables the unit to

reach the preset temperature in the shortest time. In COOL mode, the unit will blow strong

cooling air at super high fan speed. In HEAT mode, the unit will blow strong heating air

at super high fan speed.

LIGHT:

Press LIGHT button to turn on the display's light and press this button again to turn off

the display 's light. If the light is turned on ,

disappears.

X-FAN:

Pressing X-FAN button in COOL or DRY mode,the icon

fan will continue operation for a while minutes in order to dry the indoor unit even though

you have turned off the unit.

After energization, X-FAN OFF is defaulted. X-FAN is not available in AUTO,FAN or

HEAT mode.

Combination of "+"

Press "+ " and "-" buttons simultaneously to lock or unlock the keypad. If the remote

controller is locked,

three times.

" singal) and Quiet OFF (there is no signal of "

. Within 5 seconds,pressing +or - button adjusts the

disappears and "ON "blinks .00:00 is displayed for ON time

and "-" buttons: About lock

is displayed. In this case, pressing any button,

" signal), the fan speed is not available.

is displayed. If the light is turned off,

is displayed and the indoor

OPERATION INSTRUCTIONS

and "Auto"

signal)

" displayed),

blinks