Hiddn SafeDisk Installationshandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Installationshandbuch für Lagerung Hiddn SafeDisk herunter. Hiddn SafeDisk 13 Seiten.

7. Firmware Upgrade

To upgrade the firmware of the Hiddn SafeDisk you need the original initialization CO Card or a new 'Update'

CO Card and a "Upgrade USB stick" from your organization.

1. Power on your computer and insert the Upgrade USB stick into a USB port (For product versions below

2.1.2.0, a USB 2.0 port must be utilized)

2. When "Waiting for Key Token. Please insert..." appears, press "U" to start the Upgrade process. Note

that it can take up to 5 seconds from the USB stick is inserted until the system detects it.

3. Searching for upgradefile... ok

Reading upgradefile ..................................... OK

Upgrade version: 2.1.1.9

Current CM2 version: 2.1.1.6

4. Insert a Crypto Officer card when "Insert a CO card to authorize upgrade..."

Verifying smart card before upgrade...

Reading Crypto Officer Token...

5. Enter PIN when prompted and wait for the initialization to finish.

Your user certificate will expire in XXXX days.

User certificate validity dates:

From: XX.XX.XXXX XX:XX

Until: XX.XX.XXXX XX:XX

The current time of CM2 is XX.XX.XXXX XX:XX:XX

CO card authenticated

Searching for upgradefile ............................... ok

Reading upgradefile .........................................ok

6. Press 'y' to continue with upgrade

Installing CM2 upgrade

Please do not power of or unplug your computer until upgrade is finished.

Installing FPGA image (xxxxxxxxxx bytes)... [ XX%]

Verifying image signature... ok

Installing SKR image (xxxxxxxxxxx bytes)... [ XX%]

Verifying image signature... ok

Installing SAM image (xxxxxxxxxxx bytes)... [ XX%]

Verifying image signature... ok

Upgrade complete. Press any key to shut down computer...

Hiddn Security AS

Hiddn Safedisk Installation Manual LT02-IM-01-ENG-24.04.2018

http://www.hiddn.no

Page 6 of 12