Gainsborough K223 Kurzanleitung
Blättern Sie online oder laden Sie pdf Kurzanleitung für Beleuchtungsanlagen Gainsborough K223 herunter. Gainsborough K223 2 Seiten. Solar globes stake light
Seite druckenSolar Globes Stake Light
K223
v001: 11/10/21
Please read and retain these instructions for future reference
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the
packaging.
Connect the top part with the spike by twisting them together.
Before using first time
Allow lamp to charge for at least 8 hours in full
sunlight with the ON/OFF switch in the ON
position. The ON/OFF switch is located under
the solar panel. Once the batteries are fully
charged, set the ON/OFF switch to ON. If the
lamp does not turn on after dark refer to
Maintenance section.
NOTE: In order to verify that the button is
correctly in the "ON " position, cover the solar panel with your hand and light should turn
"ON" automatically.
Find an ideal Place for the Solar Light.
Place the solar light in an area where it will receive direct sunlight for at least 8 hours per day. The number of
hours the light will illuminate is directly proportional to the hours of sunlight it receives. If the light is placed
in a shaded area, it will not be able to fully charge and its illumination time will be limited. Do not place the
light near other outdoor lighting like porch or streetlights. These may fool the sensor and keep the light from
coming on, or cause it to turn off automatically
Dimensions
(H) 84 x (W) 24 x (D) 8.5cm
Material: Metal, Glass, PS
Battery: 1x Ni-MH AAA 300mAh 1.2V (not replaceable)
5x Warm White LED lights (not replaceable)
•
SITTING AT 84CM TALL THIS SOLAR GLOBE STAKE LIGHT HAS 5 ARMS
EACH WITH A CRACKLED GLASS GLOBE ON THE END, EACH IN A
DIFFERENT COLOUR
•
EACH GLOBE HAS A WARM WHITE LED INSIDE
•
IN A BRONZE LOOK FINISH
•
A REAL STATEMENT PIECE FOR YOUR GARDEN
•
SOLAR POWERED SO NO CABLES OR WIRES AND AUTOMATICALLY
ILLUMINATES AT DUSK
ALWAYS POSITION IN DIRECT SUNLIGHT