Celestron FirstScope 90EQ Handbuch zur Schnelleinrichtung - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Teleskop Celestron FirstScope 90EQ herunter. Celestron FirstScope 90EQ 2 Seiten. Celestron firstscope 90eq: quick setup

Seite drucken

Quick Set-up Guide [cont]

Locate the counterweight bar and

counterweight. Slide the counterweight half

way down the counterweight bar and tighten

the locking screw to secure in place.

The other cable attaches to the Declination

axis as pictured above.

Locate the StarPointer finderscope. Remove

the knurled nuts on the threaded posts at the

focuser end of the telescope tube.

Insert the diagonal into the focuser and tighten

the set screw.

For detailed usage information please consult your owner's manual.

Thread the threaded end of the counterweight

bar into the Dec axis of the equatorial mount.

Place the telescope tube on the equatorial

mount so that the tube is facing forward as

pictured above.

Orient the Star Pointer so that the glass

window is facing towards the front of the tube.

Place Starpointer over the posts on the tube

and tighten it down with the knurled nuts.

Insert the chrome barrel of the 20mm eyepiece

into the focuser and tighten the set screw.

Slide the chrome end of the slow motion

control cables onto equatorial mount gear

shaft.

Slide the tube onto the mount as shown

above. Secure tube in place by tightening the

bolt as shown above (inset).

Loosen the set screw on the focuser so that it

does not obstruct the inner diameter of the

focuser. Remove the plastic cap covering the

end of the focuser.

Remove the lens cap from the front of the

telescope. To observe, look through the

eyepiece as shown above.