Celestron NexStar 102GT Handbuch zur Schnelleinrichtung - Seite 4
Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Teleskop Celestron NexStar 102GT herunter. Celestron NexStar 102GT 4 Seiten. Computerized telescope
Seite drucken
13. Now, using the UP and DOWN scroll but-
tons (located on #6 and #9), verify the time
zone you are in and press ENTER.
StarPointer
Finderscope
Alignment
Star
16. If the StarPointer finderscope has been
properly aligned, the alignment star should now
be visible in the field of view of the eyepiece.
19. Repeat the process for the third alignment
star. When the telescope has been aligned
to the final star, the display will read "Match
Confirmed". Press UNDO to display the names
of the three bright objects you aligned to,
or press ENTER to accept these three objects
for alignment.
For general usage information, please consult your user's manual.
If you have questions or problems with setup, please contact Celestron Technical Support: 310.803.5955
Computerized Hand Control Guide
14. Using the numeric key pad, enter the date.
Press ENTER to continue. Press UNDO
to backspace.
p
17. The Computerized Hand Control will prompt
you to center the bright alignment star in the
center of the eyepiece. Once centered, press
ALIGN. This will accept the star as your first
alignment position.
20. Now that your telescope is properly
aligned, you are ready to find your first object.
Press the TOUR button on the Computerized
Hand Control. The Computerized Hand Control
will display a list of objects that are visible for
the date and location entered.
www.CELESTRON.com
[cont.]
15. Use the directional arrow keys on the
Computerized Hand Control to slew (move) the
telescope towards any bright celestial object
in the sky. Center the object in the StarPointer
finderscope and press ENTER.
18. For the second alignment object, choose a
bright star or planet as far from the first align-
ment object as possible. Once again use the
directional arrow buttons to center the object in
the StarPointer finderscope and press ENTER.
Once object is centered in the eyepiece,
press ALIGN.
21. Press INFO to read information about the
object displayed. Press the DOWN scroll key to
display the next object. Press ENTER to slew
(move) to the displayed object.