Dynamco CYCLOPS PARALYSER 485 Gebrauchsanweisung - Seite 4
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Sicherheitssystem Dynamco CYCLOPS PARALYSER 485 herunter. Dynamco CYCLOPS PARALYSER 485 13 Seiten.
Seite druckenARMING AND DISARMING
To arm the P485, press the lock button on the remote control supplied by the
vehicle manufacturer. Arming the system is accompanied by two flashes
from the indicators and two chirps from the siren. The status LED (red light
on the dash) will glow, then begin flashing after 5 seconds.
To disarm the P485, press the unlock button on the remote control.
Disarming the P485 is accompanied by one flash from the indicators and one
chirp from the siren. The siren and indicator confirmation order can be
reversed and/or disabled (see option settings). The status LED will also
extinguish.
AUTO RE-ARMING
The P485 will auto re-arm only in vehicles that feature an auto re-lock
function as part of the original system. Some vehicles re-lock doors if the
vehicle is not entered within a given time after unlocking by remote control.
INTRUSION DETECTION
The P485 is equipped with four zones of protection doors, boot, bonnet &
glass breakage. The combined zones can be triggered a maximum of three
times after arming. When a zone is triggered, the siren and indicators will
sound and flash for 30 seconds. Both indicators and siren will reset for five
seconds after each 30-second trigger period before sounding due to
subsequent triggers.
- Page 4 -