AutomationDirect GS1 Series Benutzerhandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Controller AutomationDirect GS1 Series herunter. AutomationDirect GS1 Series 16 Seiten.

Seite drucken

therNet

NterFAce

Part Number

Input Voltage

GS-EDRV

GS-EDRV100

Can be used with all GS and DURA

GS-EDRV(xxx) Ethernet Interfaces provide low-cost, high-performance Ethernet links between control

systems and any GS/DURA

Ethernet switches or hubs, the GS-EDRV(xxx) allows you to communicate with your AC drives over qualified

Ethernet networks.

The control systems can be any of the following:

• DL205 CPU, DL405 CPU, or a WinPLC, with the appropriate Ethernet Remote Master module

(H2-ERM or H4-ERM)�

• A Productivity3000 CPU using the onboard Ethernet port�

• A PC running Entivity's ThinknDo software, a PC using a custom device driver that was developed

using our Ethernet SDK, or a PC running KEPDirect EBC or OPC Server�

• Any independent I/O controller with a Modbus TCP/IP driver�

The control function is performed by one of the control systems mentioned above. The I/O mapping

function is performed by an H2(4)-ERM module (purchased separately). The H2(4)-ERM module is

configured with the ERM Workbench Utility which is part of the DirectSOFT PLC programming software.

The functions of the GS-EDRV(xxx) interface are as follows:

• process input signals from the AC drive

• format these signals to conform to the Ethernet standard

• transmit converted signals to the control system

• receive and translate output signals from the control system

• distribute the output signals to the appropriate drive

• DIN-rail mounting

• built-in web browser allows users to configure and control the drive from any web browser via the

IP address of the GS-EDRV(xxx)�

The GS-EDRV(xxx) requires an external 24 VDC power supply.

The GS series drives have a provision for shutting down control or power to the drive in the event of a

communications time-out. This function can be set up through the drive parameter group 9.

Refer to the "GS Series AC Drive Ethernet Interface User Manual" or

detailed information.

GS1 Series AC Drives User Manual – 3rd Edition – 11/09/2018

GS-EDRV(xxx) Specifications

Input Current

10-33 VDC

90-135 mA

10-36 VDC

50-220 mA

AC drives.

pulse

series AC Drives. With the appropriate cable connections and, if needed,

pulse

Ethernet Communication

10BaseT

10/100Mbps

www.AutomationDirect.com

Appendix A: Accessories

for

Page A–13