Celestron PowerSeeker 21039 Handbuch zur Schnelleinrichtung
Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Teleskop Celestron PowerSeeker 21039 herunter. Celestron PowerSeeker 21039 2 Seiten. Powerseeker series
Auch für Celestron PowerSeeker 21039: Gebrauchsanweisung (8 seiten), Spezifikationen (4 seiten), Broschüre & Specs (4 seiten), Spezifikationen (2 seiten)
Seite drucken
PowerSeeker 50
Item# 21039
1
Your PowerSeeker 50 includes: optical tube w/ lens
shade attached; tripod with center support bracket;
three eyepieces; a 3x barlow lens, star diagonal,
finderscope with bracket; The Sky™ CD software;
documentation including owner's manual.
4
All three legs should be the same length to
provide a level platform for the telescope.
7
Replace threaded bolt to secure the optical
tube to the mount. Attach the nut to the
threaded bolt by turning clockwise and tighten.
Make sure nut falls into recess.
Item #31132
Celestron Technical Support: 310
2
To set up the tripod, spread the legs outward
until they are fully extended. Extend the center
portion of each of the three tripod legs down 6-
8".
5
Remove the threaded bolt from the underside
of the telescope tube.
8
Properly assembled, optical tube should
appear as pictured above.
Questions or Problems with Set-up?
CONTACT:
Quick Set-up Guide
3
Use the three tightening snaps located at the
bottom of each leg to secure the extended legs
in place.
6
Line up hole in mount with the hole on the
underside of the optical tube as shown above.
9
Remove knurled finderscope nuts from the
optical tube.
.
.
803
5955