Celestron Travel Scope 70 Gebrauchsanweisung - Seite 5
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Teleskop Celestron Travel Scope 70 herunter. Celestron Travel Scope 70 12 Seiten. Up to 40x magnification full-height tripod with altazimuth mount
Auch für Celestron Travel Scope 70: Handbuch zur Schnelleinrichtung (8 seiten)
Seite drucken
SETTING UP THE TRIPOD
1. The tripod comes preassembled. Start by spreading the legs
outward. At this point, the tripod will measure 16" tall. You can
use the tripod in this position on a tabletop or extend the legs
further for additional height.
2. To extend the tripod legs to your desired height, unlock the tripod
leg clamps at the bottom of each leg (Fig. 4) and pull down.
Close the leg clamp to secure each leg. When all three legs are
fully extended, the tripod will look like Fig. 5 and measure about
42" in height.
3. For an additional boost in height, you can raise the central
column at the top of the tripod. To do this, turn the central
column locking knob (Fig. 6) counterclockwise until it is loose.
Pull up on the head of the tripod until you reach your desired
height. Then tighten the locking knob. The maximum height of
the tripod is 49".
Fig. 3
Fig. 4
Fig. 5
Fig. 6
ENGLISH
I
5