Gait up Physilog 4 Benutzerhandbuch und Spezifikationen - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch und Spezifikationen für Messgeräte Gait up Physilog 4 herunter. Gait up Physilog 4 6 Seiten.

Practical considerations

• Make sure Physilog® sensors are fully charged before doing measurements (LED shines green when

connected to computer or charger, you can also check with RTK>check>Battery level) to benefit from the

maximal battery life (given in autonomy section).

• For synchronous measurements with several sensors, make sure to switch them ON at the same time (5-

10sec delay) when they are close to each other. For example, put them all on a table and switch them ON

one after the other. Make sure that they blink green synchronously before placing them on the subject.

• Make sure to know which «.bin» file corresponds to which trial for your analysis – Last digits of file name

are automatically incremented. Note that date of file generation (recorded between one start and stop of

the Physilog®) is visible in the XLS or CSV file.

• Copy trial recordings to your computer, Physilog®4 is not the best place to keep and save important data.

• For Gait Analysis with Gait Up's Gait Analyser (only), sensors can be placed in any orientation, it will not

influence measurements.

• The Physilog® can be used outside. Warning: the sensor is not waterproof.

Handling

• Physilog®4 should be handled carefully. In particular, it should not receive

shocks, such as fall, crushing, being hit, ...

• Storage: Store in a cool (0°C – 30°C) and dry place. The provided suitcase is

the perfect place for your sensor.

• Cleaning: Sensors can be cleaned gently using alcohol wipes. Before you

clean the device make sure it is turned off and disconnect all cables.

Caution: Do not put any liquid nearby the micro USB port. Excess of liquid

may damage the sensor. Straps can be washed in a washing-machine.

• Make sure to plug the USB cable in the right way: contact pins should be

centered

• Sensors do not need yearly recalibration.