Dynamic CCTV DVR-8 Benutzerhandbuch - Seite 9
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für DVR Dynamic CCTV DVR-8 herunter. Dynamic CCTV DVR-8 18 Seiten. 8 channel digital video multiplex recorder
Seite drucken8 channel stand-alone DVMR
ALL ABOUT IMAGE RECOGNITION & PROCESSING
3) Example of Port Forwarding
Because ADSL is the most popular Internet service widely available in most of countries, we explain
more details about how to connect DVMR unit to ADSL line via Router or Gateway, to allow
accessing to this DVMR unit via Internet line far apart from DVMR unit.
PC
Internet
Client program
(remote viewer)
211.100.16.8
ADSL
modem
Intranet
PPPoE
w/
protocol
dynamic IP
or
static IP
Router
or
Gateway
Port Forwarding
(IP Forwarding)
PORT
From 8000
To 8015
Port forwarding : Port forwarding is called differently by each of router manufacturers, like IP forwarding,
IP bounding, port forwarding, port bounding or port routing. Our users can set port forwarding stated in
installation manual of router or gateway without big trouble, and complete IP network to which user can
connect many of our DVMRs, that are 1 ch DVMR, 4 ch DVMR, 8 ch DVMR and 16 ch DVMR, to access
to those units via Internet line far apart from those units.
Port forwarding is a kind of arrangement we have to set in web site of Router or Gateway to connect
external port to internal IP address, for example in above picture, PORT 8000 to IP 192.168.1.150,
PORT 8001 to IP 192.168.1.151, an so on.
According to our own test with NETGEAR Router, it is working perfectly, and we recommend our users
to adopt NETGEAR Router in case DVMR unit is connected to ADSL line.
25
3. Operation
Other
IP : 192.168.1.165
device(PC)
PORT : 8015
IP : 192.168.1.154
DVMR unit-5
PORT : 8004
IP : 192.168.1.153
DVMR unit-4
PORT : 8003
IP : 192.168.1.152
DVMR unit-3
PORT : 8002
IP : 192.168.1.151
DVMR unit-2
PORT : 8001
IP : 192.168.1.150
DVMR unit-1
PORT : 8000
8 channel stand-alone DVMR
ALL ABOUT IMAGE RECOGNITION & PROCESSING
Chapter 2. Procedure
2-1. Camera Connection
Connect the camera to the CAMERA INPUT on the Rear Panel of the system.
......
V
G
CH1
CH8
VCR
A
LOOP
MONITOR
Setting video system : The DVMR set the video system of camera NTSC or PAL automatically.
2-2. Monitor Connection (Composite Connection Method)
Connect the monitor to the MONITOR OUT on the Rear Panel of the system
......
V
G
CH1
CH8
VCR
A
LOOP
MONITOR
Screen positioning : If picture displayed in your monitor is not at the center of monitor, you can relocate
images to make them shown in the middle of monitor.
Press [P/T] button for a long time to enter into screen position mode, and you
can adjust location of pictures using [UP], [DOWN], [LEFT] and [RIGHT]
buttons. Press [P/T] button for a long time again to quit screen positioning mode.
If you press [ENTER] button in the process of screen positioning mode, location
of pictures return to original location set by manufacturer.
Notice : Connect camera or monitor to DVMR unit while DC power switch on the front panel is off.
6
2. Installation
DC
LEVEL
V.P
VIDEO
DC
VIDEO
LENS
AC24V/DC12
Rear part of CAMERA
VIDEO A
VIDEO B
VIDEO C
IN
OUT
IN
OUT
IN
OUT