Dynamic CCTV MX-8D Einrichtungs- und Betriebshandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Einrichtungs- und Betriebshandbuch für DVR Dynamic CCTV MX-8D herunter. Dynamic CCTV MX-8D 6 Seiten.

Dynamic CCTV

Page 4 of 1

Ltd

DYNAMIC MX DVR PTZ SETUP AND OPERATION GUIDE

The storing of Pre sets and how to run your tour will be explained later in this guide but to set each of the

tours simply click on each of the eight options and choose a pre set number from 1 to 15 (the DVR will only

store up to a maximum of 15 pret sets, if your tour contains less pre sets than the maximum allowable eight

simply leave the unused options set to Off.

NOTE : After setting your tour (s) you will see the programmed tour number(s) appear within the tour box for

each telemetry device , any camera inputs that do not have programmed tours will be displayed within the tour

box as Off.

3) OPERATING YOUR NOW SET UP TELEMETRY DEVICE

The operation of all telemetry devices is done using a ptz GUI which can be controlled by either mouse or the

front dvr keys, to bring up the GUI simply right click on the screen or press the menu button to bring up OSD

options then select the option labelled PTZ as seen below :

NOTE : Before selecting the PTZ option you should bring the chosen camera you wish to control up on full

screen view, this is how the dvr knows which telemetry settings to use for each camera input.

Once you have selected the PTZ option you will see a GUI appear as below: