Airdog KJ200F-X3 Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Luftreiniger Airdog KJ200F-X3 herunter. Airdog KJ200F-X3 8 Seiten.

Seite drucken

Display and Air Quality Indicator Instruction

Green:

Excellent

AQI ≤ 50

Yellow Green:

Good

50 < AQI ≤ 100

Yellow:

Moderately Polluted

100 < AQI ≤ 150

Red:

Hazardous

AQI > 150

AQI numbers are calculated based on the real time particles numbers in some air

volume according to United States Environmental Protection Agency (EPA). The

numbers could be affected by the air flow speed, air puriﬁer position and ambient

environment. AQI is an indicator of air quality. As the AQI increases, an increasingly

large percentage of the population is likely to experience increasingly severe adverse

health effects.

AQI (Air Quality Index)

This is a calculated air quality index based on the

particle numbers that the sensor measures in the air.

Ranges from 0-500.

Wind Speed Indicator

L1-L4, slow to fast.

Cleaning Reminder

Displays when collecting plates

need to be washed.

Faulty Reminder

When "9XX" keeps appearing on the display

after running for more than 3 minutes, and

power indicator is blinking, clean the unit

and make sure to put every part back

correctly and make solid contact. Please

move to the Full Cleaning Cycle section for

more cleaning details.

If "9XX" is still on the display after

cleaning, please contact customer service

for further help.

Collecting Plates Cleaning

1. Clean the collecting plates when the air puriﬁer displays "

2. Turn off the power and unplug the unit. Wait 5 minutes. Then open the back shroud and pull out the collecting plates (Pic 1).

3. Follow the instructions on Pic 2 and Pic 3.

a. Slide to separate the seat and collecting part.

b. Separate the upper collecting part and bottom collecting part to wash.

4. Dry the collecting plates after cleaning (recommend over 24 hrs of drying time).

5. Put back the collecting plates in the direction of labeling.

6. Long press the Operation Button to clear "

" and reset.

Upper collecting part

Bottom collecting part

Pic 1

Collecting part

Seat

Pic 2

Pic 3