ADEMCO Vista 15 Kurzanleitung - Seite 3

Blättern Sie online oder laden Sie pdf Kurzanleitung für Bedienfeld ADEMCO Vista 15 herunter. ADEMCO Vista 15 4 Seiten.

Ademco Vista 15 Quick Guide

To turn chime mode on and off:

Enter your [security code] + [9].

To turn voice chime mode on and off:

Press [#] + [0] + [2] + [4]. Voice chime can only be activated when chime mode is on.

For more information on this topic please visit the complete

Reset

To silence an alarm and to clear memory of an alarm event, enter the [security code] + [1] sequence

twice.

Security Codes

You can program up to 16 additional users, however only the Master user or Partition Programmer can

assign user codes to users.

To add a user, enter your [Master/Partition Programmer code] + [8] + [user #] + [new user's code].

To delete a user, enter your [Master/Part. Prog code] + [8] + [user number ] + [#] + [0].

For more information on this topic please visit the complete

Trouble Conditions

Trouble conditions are indicated by the word CHECK and continual beeping from the touchpad. Any key

will silence the beeping. A display of CHECK + zone no. may indicate that a problem requires your

attention. Check the specified zone area, close any open doors or windows and enter your security code

and press [OFF]. If your system includes wireless sensors, the CHECK condition may be caused by some

change in the environment of the protected area.

To silence trouble beeps, press any key or enter your security code and press [OFF].

For a complete list of Trouble Conditions, please refer to the

Troubleshooting

page.

Volume

The volume on the Ademco Vista 15 is not adjustable.

https://alpha.adt.com/help/41.html[11/8/2018 11:51:27 PM]

Admeco Vista 15

Safewatch and Ademco Systems

Return to Top

manual.