Dynamic Engineering PCIe8LXMCX2CB Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für PCI-Karte Dynamic Engineering PCIe8LXMCX2CB herunter. Dynamic Engineering PCIe8LXMCX2CB 20 Seiten. Pcie 8 lane 2 position xmc compatible carrier. connector bus version

Seite drucken

figures 2 & 3 at the rear of this manual.

SCSI/DIN

JN4

Install the RP/RX resistors to tie the XMC signal to the selection point – to distribute to

the SCSI or DIN connector and or other XMC position. Use RCB and/or RIO to select

the IO side of the connection. This "I" form made of 4 0402 resistors allows for selection

with almost no signal stub. Selectable on a signal by signal basis.

Special features:

• 24 lane Gen1/2 compliant Switch

• 8 lanes allocated to PCIe "gold finger" interface. 8 lanes each to the XMC's

• Switch can store and forward locally to communicate directly between the XMC's

• Voltage monitors, each with LED's on plus 12V, minus 12V, plus 5V, plus 3.3V, and

switch power [1.0V]

• 10A regulator for XMC 3.3V and 5V supplies. Shunts for Delayed, not Delayed, Off

• Selection switch for VPWR [12V or 5V] per XMC. Option for hardwired 5V or 12V

• Front panel connector access through PCI bracket

• User IO [Jn4 and/or Jn6] available through one of two cable connectors (DIN IDC or

SCSI II compatible) Spare pins on SCSI connector can be shunt selected to power

or ground.

• Connector Bus available to cross connect XMC rear IO between modules

• Cooling cutout for increased airflow to XMC's

• Optional Fan(s) for increased airflow

• JTAG programming support

• DIP switch to select global addressing on XMC's

The PCIe8LXMCX2CB is ready to use with the default settings. Just install the XMC(s)

onto PCIe8LXMCX2CB and then into the system.

RIO

RCB

Embedded Solutions

XMC

JN6

Page 5