Dynamic Engineering cPCIRepeat32 Benutzerhandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Adapter Dynamic Engineering cPCIRepeat32 herunter. Dynamic Engineering cPCIRepeat32 13 Seiten. Cpci 6u 4hp pmc carrier with pci bus expansion extended temperature
Seite druckenProduct Description
cPCIRepeat32 is part of the Dynamic Engineering cPCI and PMC compatible family of
modular I/O components.
The cPCIRepeat32 is a 6U 4HP design with one PMC position. The design is rated for
industrial temperature operation "ET" –40C +85C.
The bridge isolates the cPCI PCI bus [J1] from the local PMC PCI bus. Connector J2
has a "Repeated" copy of the PCI bus to be used for bus expansion purposes. Please
note: J2 is not pinned out in the standard manner. Do not use in a backplane not
designed for cPCIRepeat32. The arbitration and clock references from the secondary
side of the bridge are also available on J2.
Easy to use as a plug and play device. In transparent mode no special software is
required for the carrier. A special hidden address range is available to allow high-speed
local bus operations without interfering with the cPCI bus.
Special features:
•
Universal cPCI 6U 4HP.
•
Extended temperature range [-40 +85C]
LED names within
quotes: LED's for power rails are illuminated when corresponding
voltage is within tolerance.
•
LED on PMC Busmode
•
LED on plus 12V "P12V"
•
LED on minus 12V "M12V"
•
LED on plus 5V "P5V"
•
LED on plus 3.3V "P3.3V"
•
Secondary VIO set to 3.3V
•
32 bit operation on both PCI buses
•
66 or 33 MHz operation. With 66 MHz. primary bus speed the secondary bus can be
66 or 33 MHz.
•
Front panel connector access through cPCI bracket
•
JTAG programming support option
•
GPIO bus option
cPCIRepeat32 is ready to use with the default settings. Just install the PMC onto the
cPCIRepeat32 and then into the system.
"PMC-0"
Embedded Solutions
Page 5