AutoMotionShade 4280P-1230 Kurzreferenz-Handbuch - Seite 4
Blättern Sie online oder laden Sie pdf Kurzreferenz-Handbuch für Inneneinrichtung AutoMotionShade 4280P-1230 herunter. AutoMotionShade 4280P-1230 4 Seiten. Motorized dual roller shade
Seite druckenMotor features:
These motors are equipped with following features:
1. Mechanical limits adjustments. In our experience, Electronic limit always were prone to noise
interference with tight high power equipment surroundings and intermittent fails, but with these
mechanical limits, we never had a fault with limit mechanism itself and works independent of
environment noises. You adjust the limits by screws manually.
2. Safety spring loaded integrated inside the motor. Our motors are equipped with a safety spring that if
for any reason the shaft of motor broken, the shade locks into its position and shade does not drops
down. This is crucial feature for windshield shade that prevents the shade to fall while driver is driving.
3. The motor equipped with metal planetary Gearbox. Note all gears in the gearbox are metal while
most of the tubular motors in market having nylon gears in the gearbox.
Motor Operation:
1. If No-Voltage to motor, the shade stopped and locks to the current shade position.
2. If +12VDC to motor, then the shade moves up until it reaches to top limit. When it reaches to top
limit, if you keep +12VDC, the shade does not move farther than top limit.
3. If -12VDC to motor (the two wires of motor is connected to reversed polarity), then the shade moves
down to bottom limit. When it reaches to bottom limit, if you keep - 12VDC, the shade does not move
farther than bottom limit.
Size of Tubular Motor:
Diameter of motor: 1.0 inch
Length of motor: 12 inches goes inside the aluminium Tube.
The Aluminium tube has to match with this motor drive and we supply it with our shades. The
Aluminium tube external diameter is 1 3/16 inch.
508: R-1: 05/18
Date: May 2018