Celestron NexImage 93708 Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Digitalkamera Celestron NexImage 93708 herunter. Celestron NexImage 93708 12 Seiten.

Quick Start

1. Place the CD into your computer's

CD-ROM drive.

2. Install both the NexImage iCap and

RegiStax software onto your computer.

3. Thread the 1.25" nose piece into the body

of the NexImage camera. See Fig 2.

4. Slide the 1.25" nose piece of the camera

into the eyepiece barrel of your telescope.

See Fig 3.

5. Plug the small end of the USB cable into

the port on the back of the camera.

6. Plug the other end of the USB cable

into a USB port on your computer.

Once connected, the Found New

Hardware message will appear. Follow

the Installation Wizard until the device

has been successfully installed.

Fig 2

Fig 3

ENGLISH