Hidrotermal Hidro-SS Series Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Eisen Hidrotermal Hidro-SS Series herunter. Hidrotermal Hidro-SS Series 15 Seiten.

Check all the connections and make sure everything is correct before turning on.

All the functions of steam generator is controlled by the controller. see figure4.

4-2. Temperature and time preset

A) ON/OFF: Power light. Turn on the steam generator by power button. The function light is on,

temperature window indicates the steam room temperature.

B) LIGHT: Illuminating light switch: open or close the lights in the steam room. When turn on the

light, the function light beside is on too.

C) TEMP: Temperature setting: press the TEMP key to temperature setting mode, then press ▲

or ▼ to indicate your desired temperature. 35℃ and 55℃ (95-131℉) can be adjusted.

D) TIME: Working time settings: press the TIME key to the TIME set mode, then press ▲ or ▼

to indicate your desired time. 1-12 hours can be adjusted.

E) If the steam room temperature is higher than the desired temperature, the machine will stop

generating steam. The constant temperature indicator light is on and the heat indicator light is

off. When the temperature lower the desired temperature, the machine will continue to heat

water until reach target again. The heat indicator light is on and the constant temperature

indicator light is off. The steam generator will automatic control the steam room temperature

within the range of +/- 2degree.

Warning:

A) Please read the manual, the notice and warning carefully before operating.

B) Do not open the cover when main power switch is on.

C) Do not turn on the steam generator when there is lack of water.