Hidrotermal ARS-28 Handbuch für Installation und Wartung - Seite 6

Blättern Sie online oder laden Sie pdf Handbuch für Installation und Wartung für Wasserspender Hidrotermal ARS-28 herunter. Hidrotermal ARS-28 12 Seiten. Automatic residential softener

Seite drucken

Service Conditions:

Water Pressure: 0.15-0.4MPa;

Electrical Facility：AC100-240V/50Hz-60Hz;

Water Temperature: 5-38℃

Environment Temperature: 4-40℃

Relative Humidity: 90%(25)℃

7. Setting and Usage

7.1 Control Valve Setting and Usage

※The Function of Control Panel and Parameter Setting

Button lock indicator

Light on, indicating the buttons are locked. At this moment, press any single button will not work (No

operation in one minute,

Solution: Press and hold both"

B."

" Menu/Cofirm button

Press "

" under the services status, the system turns into setting interface.Select the item and inquire

the value.

Under inquiry status, press "

parameters by press "

After the setting, press "

C."

" Manual/Return button

Press "

" under the service status, the system will turn into next status immediately. (For example: If the

quality of outlet water fails, after unlocking the buttons, press"

regeneration cycles instantly; During the cycle of regeneration, if you want to finish current steps in

advance, press"

" and it will turn into next step at once.)

Press "

" under the inquiry status, the system will turn back to service status interface; Press "

under the setting status, the system will turn back to inquiry status.

Under the setting status, press "

setting value.

D.Down "

" and Up "

Under the inquiry status, press "

Under the setting status, press "

Press and hold both"

Display Area

will light on and lock the buttons.)

" and"

" for 5 seconds until the

" and the digits flash. It turn into setting interface, and you can adjust the

" and "

" and turn into setting interface by saving the settings with a "Di" sound.

" and the system will turn back to inquiry status without saving the

" or "

" to view all values.

" or "

" to adjust values.

" and "

" for 5 seconds to lift the button lock status.

Menu/

Manual/Return

Down

light off.

" in service status, it will start