Celexon HomeCinema Electric Tension screen Betriebshandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Projektionsfläche Celexon HomeCinema Electric Tension screen herunter. Celexon HomeCinema Electric Tension screen 11 Seiten.
Auch für Celexon HomeCinema Electric Tension screen: Betriebsanleitung (14 seiten)
Seite drucken
Operation of the screen
Pairing the radio remote control
The radio remote control is already paired with the integrated receiver at the
factory. If the pairing is canceled, please proceed as follows:
1. Press the „Up" button for 3 seconds until the remote control LED lights, then
connect the power cord to the screen. A beep confirms the started pairing
mode.
2. Release the „Up" button when you hear the beep.
3. Briefly press the „Up" button and release it. When the beep sounds 3 times
quickly, the remote control pairing is complete.
Connecting the Infrared Remote Control
Connect the IR receiver (h) to the Ext. IR port and position the receiver so that the-
re is permanent visual line of sight between the remote control and the receiver.
Trigger
With the trigger terminal, the screen can automatically come down and go up
when the projector is turned on and off. To do this, connect the screen via the
trigger connection to the trigger output of your projector.
It may be necessary to enable the trigger output of your projector software so
that the projector sends the control signals to the screen. For further information
please refer to the operating instructions of your device or contact the manufac-
turer of the projector.
Power supply of trigger switches: DC / AC 5V - DC / AC 20V
7