Dynamic Projection MH10 Handbuch zur Schnellinstallation - Seite 5
Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Projektor-Zubehör Dynamic Projection MH10 herunter. Dynamic Projection MH10 10 Seiten. Mirror head
Seite drucken
Mirror Head Quick Installation Guide
For the full manual please visit
Mounting of the projector
Check if mounting of an adapter plate is required for your model - if unsure check online compatibility list on our website:
https://www.dynamicprojection.com/compatibility/
Caution: Handle the mirror cautiously to avoid any damage to the lens or projector.
Without adapter plate
1.
If spacers are provided, make sure to use them.
2.
Mount the Mirror Head to the projector and
secure all screws - do not fully tighten them.
Adjust the distance between Mirror and Lens
https://www.dynamicprojection.com/mh-support/
Copyright © 2014 - 2022 Dynamic Projection Institute GmbH. All rights reserved. http://www.dynamicprojection.com
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
With adapter plate
Please note that your adapter plate might come with its own manual.
1.
If spacers are provided, make sure to use them.
2.
Mount the adapter plate to the projector, and then
mount the Mirror Head to the projector and secure
all screws - do not fully tighten them.
3.
Adjust the Mirror Head to reach the recommanded
distance of 5-10 mm.
4.
When the clearence is confirmed and the mirror can
move along the tilt axis without touching the lens secure
all screws.
5.
Connect the RS232 and the AC power-cord from
the Mirror Head control unit to the projector.
Please take into account that your projector lens might extend.
5
A
QIG - Version 2.8