Dynamic Projection MH12 Handbuch zur Schnellinstallation - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Projektor-Zubehör Dynamic Projection MH12 herunter. Dynamic Projection MH12 10 Seiten. Mirror head

Seite drucken

Dynamic Projection MH12 Handbuch zur Schnellinstallation

Mirror Head Quick Installation Guide

For the full manual please visit

Introduction

Thank you for having chosen a Mirror Head unit. If you follow the instructions given in this Quick Installation Guide, we are sure you will enjoy this device for

a long period of time.

For your own safety, please read this document carefully before you initially start-up.

Every person involved with the installation, operation and maintenance of this device has to:

be qualified

follow the instructions of this manual

consider this manual to be part of the total product

keep this manual for the entire service life of the product

pass this manual on to every further owner or user of the product

download the latest version of the user manual from our website

Warning and Safety Information

NOTE: Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not accept liability for any resulting defects or problems.

Never look directly into the light source of an attached projector!

Keep away from children!

There are no user serviceable parts (fuse) inside this unit.

The Mirror Head is is a projector add-on device for creating decorative effects. This product is only allowed to be operated with:

the voltage labeled on the device

the projector that the product is specified for

the original accessories and add-on parts

The device is designed for indoor use only. This device is designed for professional use only.

Save the box and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original

factory box.

The installation must always be secured with a secondary safety attachment, e.g. an appropriate safety cable. This secondary safety attachment must be

constructed in a way that no part of the installation can fall down if the main attachment fails.

WARNING: OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including (but not limited to) calculating working load limits, installation material being

used, and periodic safety inspection of all installation material and the device. If you lack these qualifications, do not attempt the installation yourself, but instead

use a professional structural rigger. Improper installation can result in bodily injury and or damage to property.

CAUTION: Never project directly onto people or animals - the light of the projector can cause blindness.

Before starting to mount the Mirror Head make sure:

the installation-spot is suited for the Mirror Head.

the mirror can move freely.

there are no vibrations by ventilation systems of any kind.

all screws are secured.

WARNING: The Mirror Head and the projector can be very heavy – use a second person for help.

NOTE: This device is only allowed for an installation via the original mounting brackets, clamps or stands.

NOTE: The manufacturer cannot be made liable for damages caused by incorrect installations, unauthorized parts or insufficient safety precautions!

In case you have questions about our product or need support during assembly and installation please contact our support!

Email: [email protected], Web: www.dynamicprojection.com, Phone: +43 1 996 2028 (Mon. – Fri. 8:00 – 17:00h)

https://www.dynamicprojection.com/mh-support/

Dynamic Projection Institute, Herstellungs und Vertriebs GmbH

Josef Schleps Straße 5 Halle A04 / 2104 Spillern - Austria

Commercial Register: FN400806x

Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.

QIG - Version 2.8