Celexon WHD30M Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Extender Celexon WHD30M herunter. Celexon WHD30M 11 Seiten. Wireless hdmi set

Transmitter Rear Panel:

1. HDMI IN: This slot is where you connect the HDMI source.

2. Power: Plug the 5V DC power supply into the unit or connect to the source USB

port via USB to Micro -USB cable.

3. Button: The button has a variety functions:

• Wakeup Function: If the adapter is in Sleep mode (Status LED is OFF and power

supply is connected), pressing this button will wake up the adapter and start

normal operation.

• Set to Factory Default Function: At any point, a long press (ten seconds) on the

button will reset the adapter to factory default.

• Next Network Function: When the button is short pressed on the transmitter

side, the adapter will give up the current associated network and will join the

next available network

User Case Example: One transmitter is connected to a receiver attached to a display,

while another TV is connected to another receiver in the room. The user wants to

send the audio and video to the other display. To accomplish this, pressing the button

of the transmitter will cause it to switch from its current TV display to the other dis-

play. Every time the user presses the button, the transmitter will attempt to connect

to the next available receiver in the room. A maximum of ten receivers can be suppor-

ted in the same room.

Note that pressing the button on the transmitter side will always interrupt the current

audio/video connection such that the transmitter can search for another network,

even if none are available. If only one network is available in the room, the transmitter

will eventually return to its only network and restablish a video connection with it

after finishing its search.