HiFiMAN HE-300 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kopfhörer HiFiMAN HE-300 herunter. HiFiMAN HE-300 8 Seiten.

HiFiMAN HE-300

Set-up and Operation

1. Please allow at least 150 hours of constant use for break-in of your new

headphone to achieve best sound quality. Volume during the break-in period

does not have to be loud and you can enjoy the HE-300 as you would

normally.

2. To connect your headphones to an amplifier, please use the supplied

cabling. The mini-coax plug with the red dot goes to the right side marked

with R. (Depending on the cable in use, the cable itself can also show L and

R on the plugs.) Push the connector straight onto the socket and then use

your fingers to tighten the washer. When tightening, please make sure to

move the washer only and not the cable as such. A loose connection can

lead to drop outs and distortion. Repeat the process with the other mini-coax

connector.

3. To clean your headphone, please use a soft, slightly damp cloth only. Do not

use any detergents and since it is an open back design, make sure not to let

any fluid enter the open sides of the headphone. The leather headband can

be maintained using standard leather care products. Should your earpads

become worn and no longer offer a good fit with your head, you can replace

them with new ones which can be supplied from your dealer or from www.

head-direct.com.

4. Note: The internal drivers do not require maintenance. Any attempt to

remove, alter or modify them will void your warranty.

Owner's Guide