Activinsights GENEActiv Gebrauchsanweisung Handbuch - Seite 6

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung Handbuch für Siehe Activinsights GENEActiv herunter. Activinsights GENEActiv 20 Seiten.

Charging & Storing

a) Charging

Once you have received your GENEActiv device(s) allow them to fully charge in the cradle for 3

hours before configuring with the software.

This can be done via the USB port on your computer or using a USB wall plug. We recommend

using a wall plug when charging your devices so that it does not interfere with the GENEActiv

software. It is essential that the power supply provides 500mA on every port to ensure the devices

fully charge.

A red light on the device will indicate that the device is charging. After 3 hours, once a green light

flashes, this indicates that the device can be checked by the software to ensure the battery is full

and the device is ready for configuration. The LED lights are just visual indicators - it is essential to

check the battery level in the GENEActiv PC software for a reliable reading. When fully charged,

unplug and remove devices from the cradle if you are not configuring straight away.

IMPORTANT: DO NOT leave GENEActiv devices on charge for longer than 3 hours at a time.

Following a full 3 hours charge, the GENEActiv should have over 90% battery, prior to deployment.