Autonics BC Series Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Handbuch für Zubehör Autonics BC Series herunter. Autonics BC Series 7 Seiten. Color mark sensor
Auch für Autonics BC Series: Handbuch (7 seiten), Produkthandbuch (5 seiten)

Seite drucken
Autonics BC Series Handbuch
Dimensions
M12 Tap
Mounting Bracket
28
2-R1.6
±0.1
25.4
6-Ø3.2
12.7
±0.1
35
Installation and Sensitivity Adjustment
11 4425-5103
16
R2
2-Ø3.2
2-R2
20
①Installation
: Place the color mark sensor and the target object facing each other then
affix the unit. The installation distance should be within ±2mm of 15mm .
② Press the SET key to enter teaching standby status. Place the desired color
at the sensing position (spot) and hold the SET key for 3 seconds to set the
reference color. When it is complete, the teaching indicator will display the set
color
③ Hold the SET key for 3 seconds change sensing mode and sensitivity
settings.
④ Hold the SET key for 5 seconds to set the timer. The timer is a 40ms OFF
delay timer.
※ In case of teaching error, the output indicator and teaching indicator will flash
depending on the intensity of received light.
※ When detecting metal or glossy objects tilt install the sensor at about 10 to 20
degree angle.
11 98782-2296 Internet: www.smartec-automacao.com.br
Color Mark Sensor
M3 Tap
6.5
28
(A)
Photoelectric
Sensors
(unit: mm)
(B)
Fiber
Optic
Sensors
(C)
Door/Area
Sensors
(D)
Proximity
Sensors
(E)
Pressure
Sensors
(F)
Rotary
Encoders
(G)
Connectors/
Connector Cables/
Sensor Distribution
Boxes/Sockets
(H)
Temperature
Controllers
(I)
SSRs / Power
Controllers
(J)
Counters
(K)
Timers
(L)
Panel
Meters
(M)
Tacho /
Speed / Pulse
Meters
(N)
Display
Units
(O)
Sensor
Controllers
(P)
Switching
Mode Power
Supplies
(Q)
Stepper Motors
& Drivers
& Controllers
(R)
Graphic/
Logic
Panels
(S)
Field
Network
Devices
(T)
Software
A-11