GALAGAR GALA TIG 3200 ACDC Handbuch zur Schnellinstallation - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Schweißen System GALAGAR GALA TIG 3200 ACDC herunter. GALAGAR GALA TIG 3200 ACDC 4 Seiten. For modular equipment

Seite drucken
If aluminium wire is used, we recommend replacing the standard liner with a Teflon one.
Leave the rope as close as possible to the contact point.
Screw the liner fastening stop.
Secure the liner conduit with the locknut and trim the excess liner
leaving it at the right measurement.
Leave the liner as close as possible to the driving motor roller.
Replace the lower driving rollers with U" type groove format
Connect the equipment and set the cooling mode in SETUP.
See instructions manual or quick guide of your equipment.
TASK
www.galagar.com
rollers.
PICTURE
I
FIT
☐
☐
☐
☐
☐
☐
4