hifold Fit-and-fold booster HF02-GB Gebrauchsanweisung - Seite 9

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Autositz hifold Fit-and-fold booster HF02-GB herunter. hifold Fit-and-fold booster HF02-GB 16 Seiten.

Seite drucken

a. Place the vehicle shoulder

belt over child's chest and

into the Shoulder Belt Guide

by sliding the entire belt

rearward into the slot

on the underside

of the Headrest

and then

guide the

edge up and

over the red

slot cover

so belt lays flat.

b. Make sure the belts are not twisted.

Adjust the height of the

Headrest to position the

Shoulder Belt Guide just

above the top of your child's

shoulder ensuring the full width

of the shoulder belt is on child's

shoulder.

Installation and Securing Your Child

Pass the diagonal belt across

the child's body and allow the

diagonal belt to pass over the

outside of the base side

panel belt guide

Pass the lap section of the

adult belt through the red lap

belt guides on each side of the

hifold

Check that vehicle lap belt

is supported on pelvis such that

the belt is low on hips and

contacting thighs and that

there is no slack or twists in the

seat belt.