Galanz D90N30ASLRII-T4 Benutzerhandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Mikrowellenherd Galanz D90N30ASLRII-T4 herunter. Galanz D90N30ASLRII-T4 13 Seiten.

Seite drucken

and the indicator light will come off.

QUICK START

Use this feature to program the oven to

microwave food at 100% power conveniently.

Press QUICK START button in quick succession

to set the cooking time. The oven will auto-start

immediately. After time has gone beeps sound and

END appears in display. Press CANCEL button or

open door to clear END before starting another

cooking function.

TO STOP THE OVEN WHILE THE OVEN IS

OPERATING

Press CANCEL button.

You can restart the oven by pressing

START pad.

Touch CANCEL to erase all instructions.

2. Open the door.

You can restart the oven by closing the

door and pressing START pad.

NOTE:

Turn off the oven and remove the power plug from the wall socket before cleaning.

Keep the inside of the oven clean. When food splatters or spilled liquids adhere to oven walls,

wipe with a damp cloth. Mild detergent may be used if the oven gets very dirty. Avoid the use of

spray and other harsh cleaners as they may stain, streak or dull the door surface.

The outside surfaces should be cleaned with a damp cloth. To prevent damage to the operating

parts inside the oven, water should not be allowed to seep into the ventilation openings.

Wipe the door and window on both sides, the door seals and adjacent parts frequently with a

damp cloth to remove any spills or spatters. Do not use abrasive cleaner.

Do not allow the control panel to become wet. Clean with a soft, damp cloth. When cleaning the

control panel, leave oven door open to prevent oven from accidentally turning on.

If steam accumulates inside or around the outside of the oven door, wipe with a soft cloth. This

may occur when the microwave oven is operated under high humidity condition. And it is normal.

It is occasionally necessary to remove the glass tray for cleaning. Wash the tray in warm sudsy

water or in a dishwasher.

The roller ring and oven floor should be cleaned regularly to avoid excessive noise. Simply wipe

the bottom surface of the oven with mild detergent. The roller ring may be washed in mild sudsy

water or dishwasher. When removing the roller ring from cavity floor for cleaning, be sure to

replace in the proper position.

Oven stops operating when door is opened.

AUTOMATIC PROTECTION MECHANISM

Anytime in the operation of the oven, when the

oven cavity temperature reaches a phenomenon

of 300°C, the oven automatically enters into self

protection mode. The display shows E 01, with

one beeping every 1.5 sec until the said

phenomenon disappears, and CANCEL is pressed

to make the oven back to normal.

During grill or convection cooking, when the

temperature of oven cavity is lower then 40°C

after cooking already takes place for 5 minutes,

the oven will automatically enter into protection

mode with the screen displaying error code E 02.

This error may disappear after you press the

CANCEL pad.

If the sensor is short circuited, the system enters

protection mode with display of E03 which, when

cleared, press CANCELS to back into normal