Hifonics Titan Series Installationshandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Installationshandbuch für Verstärken Hifonics Titan Series herunter. Hifonics Titan Series 8 Seiten.

ENGLISH

INSTALLATION

The first step of installing a speaker system is a well-thought-out planning. Choose a suitable location for

your speaker components carefully. Please observe the following suggestions to ensure proper results and

best performance:

1. Choose a location which offers none or just a minimum of obstacles between the components and your

ears. Please observe at thereto, the positions of the driver's seat, the headrests and other constructions

of the inside of vehicle interior.

2. Mount the left and right speakers in the same array on each side, which means that they are installed

at the same height and directly across from each other. Do not install one speaker higher, lower, further

forward or further back from the opposite speaker.

3. Always check what's behind the chosen mounting locations to ensure that there is proper clearance for

the back of the speaker components and avoid obstructions such as window tracks, wire harnesses, gas

tank etc.

4. The best performance will be achieved, when the speakers are securely mounted to a designated speaker

opening in a door panel or a rear speaker shelf. There should be no gaps between the speaker basket and

the mounting surface.

A.) Flush mount with standard housing

B.) Angle mount with built-on housing