ADENDORFF JW-01C Betriebshandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Buben ADENDORFF JW-01C herunter. ADENDORFF JW-01C 3 Seiten. Electric jack for car

Seite drucken

I . TECHNICAL DATA

Model munber

Rated voltage

Max electric current

Rated load weight

Max load weight

Lifting range

Weight

Usage temperature

rap h f

�

\Veight

(k g )

1200

1000

800

600

400

��-

200

12 14 16

18 20 22 24 26 28 30 32 34 36

II. OPERATION INSTRUCTIONS

Warning: Please follow Uw OPERATION MANUAL strictly.

l. Park the braked car on smooth and solid ground. Do not park the car on slope.

2. lnsert the plug of the electric jack into the car lighter jack.

3. Start the engine of the car, ve1y important.

4. The saddle of the electric jack should be placed against the tight bottom of the

car and the electric jack should be put on smooth and solid grmmd.

5. Press "UP" on the switchboard and confinn that the saddle is colll\ectcd with

the right bottom position of the car. Press "UP" continuously till the car is

jacked to an ideal height.

6. Press "DOWN" on the switchboard to lower the car completely after repaiting.

JW-OlC

DC 12V

JOA

1000kg

1200kg

12cm to 35cm

3.8kg

.4o·c to +7o·c

1e wmg

. ht

· -

-rr

----

-·-

J•

...

Jacking height

(cm)

7. Press "DOWN" on the switchboard to adjust the position of the electric jack

when the saddle is not touched on the right bottom position of the car.

Operation sketch

TffAJ[NJNG:

Do ,iot move the car while the electric; jack is working,

III. SAFETY INDIC ATIONS

TI1e following points are important for your safety:

I. Please read the "OPERATION MANUAL FOR ELECTRIC JACK" carefolly

and tmderstand all the instruction before operation.

2. Overloading operation is forbiqden.

3. Tho electric jack is placed only on smooth and soliµ grotmd.

4. Keep your body away from the car while the electl')c jack is working.

5. 1n emergency, pull out the plug of the electric jack / mmediately.

IV.MAINTENANCE

The electric jack

be maintained and re p aired

must

according to the OPERATION MANUAL.

I. Put lubricant on the screw bolt of the electric jack periodically.

2. Keep it clean and d1y after operation.

3. Any change in the struc!tue is fc;,rbidden, which might affect its safety.

V.STORAGE

I. It is stored under tl1e tempera!tue from o·c to 70'C with htunidity less than 70'(<,.

2. The storage place should avoid severe collision & water damaged.

professionpls