AFI Branding ReFrame DS102 Montageanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Montageanleitung für Racks & Ständer AFI Branding ReFrame DS102 herunter. AFI Branding ReFrame DS102 2 Seiten. Double-sided

Seite drucken
assembly instructions
DS102 - double-sided ReFrame®
5
Attach the remaining two corners at the same time
7
Repeat step 7 on all remaining corners
8
Applying your custom ReFrame® fabric skin
Now that you've finished assembling your ReFrame®, it's time to apply your custom ReFrame® fabric skin. Please refer to
either a printed 'ReFrame® Fabric Installation Guide' or go to www.reframe.com.au to watch one of our instructional
assembly videos to see how to correctly apply your ReFrame® fabric skin.
NOTE: The assembly instructions for the DS102 (and included components) illustrate the fundamental steps to assemble a
'standard' Double-Sided type ReFrame®. If your Reframe® is oversize, has additional components such as joiners (not shown on
this fact sheet), accessories, or has bends/curves and you are unsure how to proceed with assembly, please contact the team
at AFI Branding on 1300 652 514 and we will guide you through the assembly process.
Developed by AFI Branding
www.afibranding.com.au
6
|
1300 652 514
|
33 Lakewood Blvd, Carrum Downs, Vic, 3201
Ensure corner is aligned and then tighten screws using
allen key