Hifonics XX-Colossus II Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Hifonics XX-Colossus II herunter. Hifonics XX-Colossus II 16 Seiten. Generation xx

Seite drucken

Hifonics XX-Colossus II Benutzerhandbuch

1. Specifications

Congratulations

Congratulations on your purchase of quality HiFonics car audio gear. Years of testing and development

have gone into each HiFonics product,and you can rest assured that you've purchased the best. Your

precision engineered HiFonics components will perform best when installed by experienced installers.

Therefore, we highly recommend that you contact your authorized HiFonics dealer to help customize

and install your system.

HiFonics Audio Products are made to withstand years of hard use, and to consistently deliver audiophile

quality sound.

A great deal of thought has gone into the compilation of this Operation and Instruction manual, and it is a

valuable reference to achieve the best possible performance from your HiFonics equipment.

CONTENTS

Specifications

Installation Notes

Wiring, Phase Shift

Functions and Controls

Speaker wiring

Stereo-Subwoofer-Mode

Mono-Subwoofer bridged

Trouble Shooting

Channels

Output Power Ratings at 14.4 Volts

Watt at 4 Ohm load

Watt at 2 Ohm load

Watt an 1 Ohm load

Mono bridged at 4 Ohm

Mono bridged at 2 Ohm

Frequency response -3dB

Damping factor

Signal to noise ratio

Channel seperation

THD&N

Input Sensitivity- RCA

Input Impendance - RCA

Input Sensitivity - balanced

Input Impendance - balanced (variabel)

Crossover - Switch for 1 & 2 Channel

Highpass / Full range / Lowpass / Bandpass

Variable Highpass - 12dB/Oct

Variable Lowpass - 12dB/Stereo - 24dB/Mono

Variable Subsonic-Filter 24dB/Oct

Crossover - Switch for 3 & 4 Channel

Highpass / Full range / Lowpass / Bandpass

Variable Highpass - 12dB/Oct

Variable Lowpass - 12dB/Stereo - 24dB/Mono

Variabler Subsonic-Filter 24dB/Oct

Crossover - Switch for 5 Channel

Variable Lowpass - 24dB/Mono

BassBoost continously variable

Bass EQ continously variable

Q Control Wide - Narrow

Phase Shift Switch only 1/2-Channel

Phasen shift continously variable

Phase Shift

(\ = controlled together )

RCA-Output

RCA-Inputselector

Bass Remote Control with PROTECTION-LED

Maxi-Fuse

Abmessungen in mm

width x hight

Length without / with Endpanels

OWNER`S MANUAL

Specifications

XX-COLOSSUS II

Class D

600 x2

1100 x2

1500 x2

2200

3000

2Hz - 70kHz

400

98dB

0.10%

0.2 - 9 Volt

20 kOhm

0.4 - 18 Volt

0.6 kOhm - 47 kOhm

25Hz - 250Hz / 24dB

10Hz - 50Hz

0dB - 18dB

30Hz - 60Hz

0° - 180°

1\2

Yes

External 300 Ampere

285 x 74

525 / 653

Page