909 OSC400 Gebrauchsanweisung - Seite 4

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Elektrowerkzeug 909 OSC400 herunter. 909 OSC400 16 Seiten. Oscillating multi-tool

Seite drucken

General safety rules

WARNING.
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
1) Work area safety
a) Keep work area clean and well lit.
areas invite accidents.
b) Do not operate power tools in explosive
atmospheres,
such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away while operating a
power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify
the plug in any way.
Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increase
the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
suitable for outdoor use reduces the risk of electric shock.
f) To reduce the risk of electric shock, the manufacturer
3) Personal safety
a) Stay alert, watch what you are doing and use
Cluttered or dark
b) Use personal protective equipment. Always wear eye
c) Prevent unintentional starting. Ensure the switch
d) Remove any adjusting key or wrench before
e) Do not overreach. Keep proper footing and balance
f ) Dress properly. Do not wear loose clothing or
g) If devices are provided for the connection of dust
Use of a cord
4
recommends the use of a residual current device
with a rated residual current of 30mA or less at
all times.
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication.
of inattention while operating power tools may result in
serious personal injury.
protection.
Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal injuries.
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool.
Carrying power tools with your finger on the
switch or energising power tools that have the switch
on invites accidents.
turning the power tool on.
attached to a rotating part of the power tool may result
in personal injury.
at all times.
This enables better control of the power tool
in unexpected situations.
jewellery. Keep your hair, clothing and gloves away
from moving parts.
Loose clothes, jewellery or long hair
can be caught in moving parts.
extraction and collection facilities, ensure these are
connected and properly used.
can reduce dust-related hazards.
A moment
A wrench or a key left
Use of dust collection