2GO 797302 Betriebsanleitung Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Betriebsanleitung Handbuch für Kopfhörer 2GO 797302 herunter. 2GO 797302 12 Seiten.

Seite drucken

Operating instructions

We are pleased that you have chosen our product. Please take your time and read the user

manual to learn more about the features and notes of the headset. The Bluetooth headset can

be used with compatible devices that support Bluetooth wireless technology. This gives you

the ability to make any calls and use music streaming services at any time. Please read this

manual carefully before using this headset. Please refer to the user manual for information

about the Bluetooth function and observe important safety and care instructions. Keep out of

the reach of small children.

Pairing the headset with a Bluetooth phone

Make sure the headset is turned off and the distance between headset and phone is no

more than one metre. Then turn on the Bluetooth function on the phone. Remove the two

earphones from the charging box to turn them on. Wait for about 10 seconds - The earphones

now automatically pair with each other. Afterwards, the headset automatically switches to

pairing mode so that the connection to your mobile device can be established. Open your

mobile device's Bluetooth settings and browse for new devices. Select "2GO mini " to establish

the connection. If the Bluetooth connection to your phone has been interrupted, it will be

automatically restored when you turn the headset back on within the operating radius.

Should a connection error occur:

1. Turn off both earphones by placing them in the charging box and turn them on again.

2. If the earphones are outside the charging box, press and hold the touch buttons of the

earphones for 3 seconds.

So you reset the headset and it reconnects again.

Switch on

Open the lid of the charging box and remove the earphones from the charging box.

Switch off

Plug the headset into the charging box and close the box.

Charging mode

Charging the headset

Plug the earphones into the charging box and close it. The headset now automatically

recharges when the charging box is loaded.

Charging the charging box

Connect the included Micro-USB cable to the charging socket, charging box and a USB

charger or PC. After one hour, the headset is fully charged.

Operation during music playback

Increase volume

Reduce volume

Pause /Play

Previous song

Next song

Voice control

Enable voice control 3 x shortly press left earphones.

Initial call

Acceptance of calls press left or right earphones briefly

Exit call

1 x press right earphones briefly

1 x press left earphones briefly

2 x press left or right earphones briefly

1 x press left earphones longer

1 x press right earphones longer

press left or right earphones briefly