dbx iEQ-15 Spezifikationen - Seite 2
Blättern Sie online oder laden Sie pdf Spezifikationen für Aufnahmegeräte dbx iEQ-15 herunter. dbx iEQ-15 2 Seiten. Graphic eq
Auch für dbx iEQ-15: Benutzerhandbuch (16 seiten), Benutzerhandbuch (20 seiten), Schnelle Übersicht (4 seiten)
iEQ 15
™
Dual 15-Band Digital Graphic Equalizer/Limiter with TYPE V™ NR and AFS™
Inputs
Connectors:
1/4" TRS, female XLR (pin 2 hot), and Euroblock
Type:
Electronically balanced/unbalanced, RF filtered
Impedance:
Balanced 40kΩ , unbalanced 20kΩ
Max Input Level:
+22dBu balanced or unbalanced
CMRR:
>40dB, typically >55dB at 1kHz
Outputs
Connectors:
1/4" TRS, male XLR (pin 2 hot), and Euroblock
Type:
Balanced/unbalanced, RF filtered
Impedance:
Balanced 120Ω , unbalanced 60Ω
Max Output Level:
+20dBu balanced/unbalanced into 2kΩor greater
System Performance
Frequency Response:
20Hz to 20kHz, +0.5/-0.25dB
Dynamic Range:
>113dB, "A" weighted
THD+Noise:
0.003% typical at +4dBu, 1kHz
Interchannel Crosstalk:
<-80dB, 20Hz to 20kHz
Noise Reduction:
Up to 10dB of dynamic broadband noise reduction
Digital Resolution:
24 bits
Sample Frequency:
48kHz
Latency:
2msec
Function Switches
AFS™:
Activates dbx AFS™ Advanced Feedback Suppression
TYPE V™ NR:
Activates dbx Type V™ Noise Reduction
EQ Bypass:
Bypasses the graphic equalizer section in the signal path
Low Cut:
Activates the 40Hz 18dB/octave Bessel high-pass filter Range
Range:
Selects either +/- 6dB or +/- 15dB slider boost/cut range
dbx engineers are constantly working to improve the quality of our products. Specifications are, therefore subject to change without notice.
The Professional's Choice In Signal Processing
A Harman International Company
Indicators
Output Level:
4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu
Gain Reduction:
4-LED bar graph (all Red) at 0, 3, 6, and 10dB
Type V™ NR:
1 LED: yellow, green or red
EQ Bypass:
1 LED: red
Clip:
1 LED: red
Low Cut:
1 LED: red
+/-15dB:
1 LED: red
Power Supply
Operating Voltage:
120VAC 60Hz, 220-240VAC 50/60Hz
Power Consumption:
17 Watts
Mains Connection:
IEC receptacle
Physical
Dimensions:
3.5" H X 19" W X 7.9" D (8.9cm x 48.3cm x 20.1cm)
Weight:
7.5 lbs.
Shipping Weight:
8.5 lbs.
™
FOR MORE INFORMATION CONTACT:
dbx Professional Products
8760 S. Sandy Pkwy.
Sandy, Utah 84070
Phone (801) 568-7660
Fax (801) 568-7662
http://www.dbxpro.com